Digital Security Controls PC1575 Manual de instalación descargar pdf (Pagina 47)

At the bottom of the screen, the partition assignment will be displayed. If the number

for a partition is displayed, then that partition is enabled (active). In the default setting,

only Partition 1 is enabled.

The “Information Source” displays where the data for the active partition(s) was obtained.

• “File” means the data was obtained from the work file.

• “Keyboard” means the user has entered data with the Assign Partitions command

to enable partitions, but the information has not yet been saved to the file.

• “Panel” means the partition assignment has been uploaded from or downloaded

to the control panel.

The following menu items are available when the Partition Area Menu is selected:

• Assign Partitions

A menu for enabling partitions will appear. The partitions and their labels will be

shown; an arrow will indicate the selected partitions.

NOTE: A partition must be assigned before it is active. Ensure that you activate

the desired partitions when downloading.

To send the assignment to the control panel, exit this section and select Download

Partition Assign from the Partition Area Menu.

• Edit Partitions

A menu for selecting which partition to edit will appear. The menu tree for

programming partitions will be displayed and the zones assigned to the partition

will also be displayed. Use the [Up] and [Down] arrow keys to select the partition

to edit, and then press [ENTER].

To add or remove zones to or from a partition, select Add/Delete Zones from the

partition menu tree. Enter the 3-digit zone number and press [ENTER] to add or

delete a zone. Any zone that is highlighted will be added to the partition.

After selecting the zone assignment, return to the partition menu tree by pressing the

[ESC] key. A window will appear and ask if you wish to save the zone assignment to file.

To save the zone assignment, answer “Yes”. Press [F3] to call up the Upload/Download

Zone Assignment Menu. Download the zone assignment to the control panel.

• Copy Partitions

After editing a partition, the programming changes can be copied to another

partition. Use this feature to speed and simplify programming when several of

your partitions are to be programmed with the same or mostly the same settings.

When selected, a menu will appear to select which partition to copy

from.

Next, a menu will appear to select which partition to copy

to.

The Customer ID Code, Partition Toggle Options, Partition Times and the Partition

Label will be copied. Note that the Zone Assignment will

not

be copied.

• Upload Partition Assign

Selecting this option will upload the Partition Assignment from the control panel.

This will allow you to view which partitions have been enabled.

• Download Partition Assign

Selecting this option will download the edited Partition Assignment to the control panel.

• Initialize Modem

Selecting this option will re-initialize the modem using the current defaults

including the setting stored in the Modem Command File (MODEMSTR.FIL). Use

this feature if the software is unable to automatically re-initialize the modem.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 109 110

Comentarios a estos manuales

Sin comentarios

Digital Security Controls PC1575 Manual de instalación Pagina 47

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Security Controls PC1575