Digital Security Controls PC1575 Manual de instalación descargar pdf (Pagina 20)

• Indicate if your modem is External (press [E]), or Internal (press [I]).

• Indicate the modem name or type (1 of 6):

Practical Peripherals PM1200 modem

Compatible 1200 baud modem

Compatible 2400 baud modem

Hayes Smartmodem Optima 2400 baud modem (+FAX 96)

DSC MD12 Modem (default selection)

Stradcom Pocket Modem

If you are using a 1200 baud modem other than the Practical Peripherals model,

select the compatible 1200 baud modem. If you are using a 2400 baud modem

other than the Hayes Optima, select the compatible 2400 baud modem.

The configuration file will now be updated. Additional configuration can be done

from within the program, using the Program Configuration function. See section 4.9

"View Computer Configuration".

10 Enter the path to the workfiles (e.g. [c:\dls1]). This information is used for auxiliary

installations where the DLS-1 software will be sharing workfiles with the main

installation over a LAN. If networking support will not be used, or if this is the main

installation on a networked system, press [ENTER] and then press any key, to

continue.

11 Make sure you still have the “Install Disk” in the diskette drive, as the file DISK1.EXE

will be decompressed from this diskette onto the hard drive.

12 When prompted, insert the diskette labelled “Source 1 Disk” and press any key. The

program will decompress the file DISK2.EXE onto the hard drive. Press any key to

continue.

13 When prompted, insert the diskette labelled “Source 2 Disk” and press any key. The

program will decompress the file DISK3.EXE onto the hard drive. Press any key to

continue.

14 You will now be prompted to enter your eight digit security stamp. This stamp is

used to identify all of your Work Files. If you are installing the software to replace an

older version and you wish to use your old Work Files, then the stamp you enter now

must be identical to the stamp used with the previous version of the DLS-1 software.

When entering the stamp, remember that “UPPERCASE” and “lowercase” characters

can be used, and they are not the same (i.e. “a” and “A” are not the same). The

stamp must be exactly eight characters long. After you have entered this stamp,

make sure you write it down on the page provided at the front of this manual, and

keep it in a safe place.

It is important that the security stamp be recorded and

safely filed: if it is forgotten, there is no way to recover the security stamp from

the computer or from the program.

If you wish to share workfiles between DLS-1 installations over a LAN, all DLS-1

installations must have the same security stamp.

15 DLS-1 will now search the AUTOEXEC.BAT file on your computer to see if the

program SHARE.EXE is installed. If you are running DLS-1 from MS-DOS, SHARE.EXE

must be loaded before running the DLS-1 package.

NOTE: This step is not relevant if you are running DLS-1 in an MS-DOS shell

under Windows95.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 109 110

Comentarios a estos manuales

Sin comentarios

Digital Security Controls PC1575 Manual de instalación Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Security Controls PC1575