Digital Security Controls PC1575 Manual de instalación Pagina 18
- Pagina / 110
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
5
1.2 Connecting the Modem to the Computer
1 Make sure your computer is off.
2 If you are using an external modem, connect it to an unused COM port on your
computer with an RS-232 modem cable. If you are using an internal modem, follow
the modem manufacturer’s installation procedures.
3 Connect the telephone line to the modem.
4 Refer to Appendix E for 1200 baud modem DIP switch settings.
5 If there are DIP switches used for COM port selection, then you must set these
switches for whichever COM port you are using. Remember that the changes to the
DIP switch settings are not recognized by the modem until it is fully powered down
and then powered back up again. This can be done with the power switch on the
external modem or by turning the computer off and then on, if you are using an
internal modem.
It is important that your modem is not configured for a communications port that is
already being used by another device. This will result in both your modem and the
other device not working properly. The best option for an internal modem is to
configure your modem for COM port 2. COM port 1 is usually occupied by an RS-232
serial channel. However, if COM port 1 is unused, do not configure your modem for
COM port 2. If you encounter problems installing your modem, please refer to
Appendix H, Modem Troubleshooting.
External Modem
Operator's Side
RS232C Cable
Connected
to Serial Port
To Phone Line
DLS-1
PC-Link Adapter Connecting Cable DB-25 Serial Connector
1.3 Setting Up PC-Link
The PC-LINK adapter allows installers to perform on-site downloading of information
to supported panels faster and more easily than downloading via a modem. For
more information on PC-LINK refer to your PC-LINK Installation Instruction sheet.
1. Make sure your computer is off.
2. Connect the DB-25 Serial Connector provided with the PC-Link kit to an unused
COM port on your computer.
3. Connect the cable included with the PC-Link kit between the DB-25 Serial
Connector and the PC-Link Adapter.
4. Connect the Adapter to the panel as described in the PC-Link Installation Sheet.
- DOWNLOADING 1
- SOFTWARE 1
- Please complete other side 2
- COMPUTER INFORMATION 3
- FORM TO: 4
- IMPORTANT 6
- 8
- DOWNLOADING SOFTWARE 10
- DLS-1 v6.7P 12
- 1 GETTING STARTED 14
- 1.1.2 Printer Requirements 17
- 1.1.3 Networking Support 17
- 1.1.4 Memory Requirements 17
- 1.1.1 Mouse Requirements 17
- 1.3 Setting Up PC-Link 18
- For Windows 95: 21
- Keyboard Functions 23
- Mouse Functions 25
- Cursor Movement 25
- Feature and Option Selection 25
- 2 USING THE DLS-1 SOFTWARE 26
- Step-by-Step Instructions 28
- Programming Manual 29
- 2.2 Run the DLS-1 Software 33
- 2.3 Log On 33
- 2.5 Select a File to Edit 35
- P-16 and P-1664 36
- P-16, P-1664 and DC1664 39
- 3 DLS-1 FILE MENUS 42
- 3.1 Main Menu 44
- 3.2 Edit a File 44
- PC4000 Panel Notes: 45
- Appended 49
- • Arm/Disarm 55
- • Alarm Memory 55
- • Bypass Zones 55
- PC3000 Panel Notes: 60
- System Status Information 61
- Record of Last Eight Changes: 61
- Zone Information 61
- Bell Test 65
- PGM Output Control 65
- Terminate Call / Hang Up 65
- Exit From This Menu 65
- DC1664, P-16 and P-1664 Menus 65
- 3.2.2 Wait for Panel to Call 69
- 3.2.3 Execute Batch Files 69
- 3.4 Notes for Section 3 71
- 4 WORKING WITH DLS-1 FILES 72
- 4.1 Create a File 74
- 4.2 Rename a File 75
- 4.3 Delete File(s) 76
- 4.4 Transfer File(s) 76
- IMPORTANT NOTE: 77
- 4.5 Default File Maintenance 78
- 4.6 Printer Functions 78
- 4.6.2 Print File List 79
- 4.7 Access Code Maintenance 80
- 4.8 Program Configuration 83
- [F5] Colour Selection Routine 85
- 4.10 Operations Log 88
- Store Operations Log to Disk 89
- 4.11 Create Batch File 90
- 4.12 Log Off 92
- APPENDICES 94
- Appendix B: AUTOEXEC.BAT 96
- Appendix C: Error Messages 97
- Modem Command File 98
- Modem DIP Switch Settings 98
- Modems Supported by DLS-1 99
- Modems Not Supported by DLS-1 99
- TYPICAL DIP SWITCH SETTINGS 100
- Appendix F: Glossary 101
- PC4010 Diagnostic Indications 108
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Security Controls PC1575
Los Sistemas De Control De Acceso De Seguridad Digital Security Controls PC1616 Manual de instalación
(53 paginas)
(53 paginas)
Los Sistemas De Control De Acceso De Seguridad Digital Security Controls PC1575 Manual de instalación
(10 paginas)
(10 paginas)
Los Sistemas De Control De Acceso De Seguridad Digital Security Controls PC1575 Especificaciones
(43 paginas)
(43 paginas)
Los Sistemas De Control De Acceso De Seguridad Digital Security Controls PC1575 Manual de usuario
(4 paginas)
(4 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.046 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales