Digital Security Controls PC1575 Especificaciones descargar pdf (Pagina 16)

P R O G R A M D E S C R I P T I O N S

Phone numbers can be up to 32 digits which will allow you

to add special digits if required. To program the phone

number, enter the numbers 0 through 9 as required. The

following is a list of programmable HEX digits and the

function they perform:

HEX (B) - simulates the [✱] key on a touch tone phone

HEX (E) - forces the panel to pause for 2 seconds

HEX (C) - simulates the [#] key on a touch tone phone

HEX (F) - marks the end of the phone number

HEX (D) - forces the panel to search for dial tone

First Phone Number ......................................... Section [31]

Second Phone Number.................................... Section [32]

Third Phone Number ......................................... Section [33]

Third Phone Number Enable ......... Section [60], Option [4]

Alternate Dial .................................. Section [60], Option [5]

If no Dial Tone Detect (HEX D) is used in the phone

number, a 2-second pause (HEX E) should be

inserted.

5.7 Communicator – Reporting Codes

The panel can be programmed to report events to the

central station by sending the Reporting Code programmed

for a particular event.

Reporting codes can be one or two digits and can use HEX

digits (A through F). The following is a description of the

different Reporting Codes that can be programmed and

when the events will be reported to central station.

Reporting Codes ................................... Section [36] to [46]

5.7.1 Zone Alarm

The panel will transmit the Zone Alarm Reporting Code

when a zone goes into alarm. 24 hour type zones will go into

alarm whether the panel is armed or disarmed and report to

the central station. All other types of zones will only go into

alarm if the panel is armed. The Police Code reporting code

will be sent after 2 zones have gone into alarm within the

same armed period.

Zone Alarm Reporting Codes .......................... Section [36]

Police Code Reporting Code ........................... Section [36]

Only Zone Alarms will count towards the Police Code

5.7.2 Zone Restoral

If the Restoral on Bell Time-out option is selected, the

panel will send the Zone Restoral Reporting Code for the

zone if the alarm output times out

and

the zone is secured.

If the zone is not secured when the alarm output times out,

the panel will send the restoral immediately once the zone

is secured.

If the Restoral on Bell Time-out option is not selected, the

panel will immediately send the Zone Restoral Reporting

Code when the zone is secured, regardless of whether or not

the alarm output is active.

24 Hour type zones will report the restoral immedi-

ately once the zone is secured.

Zone Restoral Reporting Codes ... Section [37], Option [6]

Restoral on Bell Time-out .............. Section [60], Option [6]

5.7.3 Closings (Arming Codes)

The panel will transmit a Closing Reporting Code to indicate

that the system is armed. A different Reporting Code can be

transmitted for each User Code and Master Code to identify

who has armed the system.

If programmed, a Partial Closing Reporting Code will be

sent along with the Closing Reporting Code if one or more

zones were manually bypassed when the system was armed

to warn the monitoring station of a security compromise.

If the Closing Confirmation option is enabled, the keypad

will sound a series of eight beeps to confirm to the user that

the closing code was sent and received by the central station.

Closing (Arming) Reporting CodesSection [41], Option [6]

Partial Closing Reporting Code....................... Section [41]

Closing Confirmation..................... Section [61], Option [1]

5.7.4 Openings (Disarming Codes)

The panel will transmit an Opening Reporting Code to

indicate that the system has been disarmed. A different

Reporting Code can be transmitted for each User Code and

the Master Code to identify who has disarmed the system.

If the

Opening After Alarm Keypad RingbackOpening After Alarm Keypad Ringback

Opening After Alarm Keypad Ringback option is

enabled, the keypad will emit a series of eight beeps after

an Opening Reporting Code was sent and received by the

monitoring station. If the Opening After Alarm Bell Ringback

option is enabled, the bell will squawk eight times instead of

the keypad to notify the user of a successful transmission.

The Opening After Alarm code

must

be programmed

when the Transmission Delay is being used. See

Section 5.17 “Transmission Delay”.

Opening (Disarming) Reporting Codes . Section [42], Option [6]

Opening After Alarm Keypad Ringback . Section [61], Option [2]

Opening After Alarm Bell Ringback ....... Section [61], Option [3]

5.7.5 Tampers

If the panel is programmed for Double EOL zones

(see(see

(see

Section 2.8 – “Zone Wiring”)Section 2.8 – “Zone Wiring”)

Section 2.8 – “Zone Wiring”)

, the panel will report a Zone

Tamper Alarm Reporting Code if an open condition is

present. A different Reporting Code can be programmed to

identify each zone. The Zone Tamper Restoral Reporting

Code will be transmitted immediately when the tamper

condition is restored.

A General System Tamper Reporting Code will be transmitted

when the tamper zone on any module is violated. The General

System Tamper Restoral Reporting Code will be transmitted

when the tamper zone on the module is restored.

Tamper Alarm Reporting Codes ...................... Section [38]

General System Tamper Alarm ........................ Section [38]

Tamper Restoral Reporting Codes.................. Section [39]

General System Tamper Restoral .................... Section [39]

5.7.6 Priority/Emergency

The panel will transmit a Keypad Fire Alarm Reporting

Code

and

the Keypad Fire Restoral Reporting Code when

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 42 43

Comentarios a estos manuales

Sin comentarios

Digital Security Controls PC1575 Especificaciones Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Security Controls PC1575