Digital Security Controls PC1575 Especificaciones descargar pdf (Pagina 14)

The following section explains the operation of all programmable

features and options and provides a summary of all corresponding

programming locations.

5.1 Programming Security Codes

There are three codes which can be programmed by the

installer in the Installer’s Programming function: the Master

Code, a Second Master Code, and the Installer’s Code. All

other access codes can be programmed through the [✱] [5]

command

(see Section 3.4). (see Section 3.4).

(see Section 3.4).

The Master Code can also be programmed by the user as

access code (1). If the Master Code Not Changeable

option is enabled, the System Master Code can only be

changed by the Installer.

User codes can arm and disarm the system. By selecting

the No Code Required for Bypassing option, each user

code can also have the ability to bypass zones without

entering the Master Code.

If the Sixth Code is Duress Code option is enabled, the

sixth code can be programmed by the user as a Duress

Code which will send a Duress Reporting Code to the

central station when entered.

Installer’s Code .................................................. Section [03]

Master Code ....................................................... Section [04]

Second Master Code......................................... Section [05]

Master Code Not Changeable ........ Section [09], option [1]

No Code Required for Bypassing.. Section [09], option [2

]

Sixth Code is Duress Code ............ Section [09], option [3]

5.2 Zone Definitions

These sections will allow you to select how each of the 6

zones will operate. Each zone requires a two digit entry. In

addition to zone definitions, six different attributes may be

programmed by zone (see Section 5.3 – “Zone Attributes”).

[00] Null Zone

The zone is vacant. Unused zones should be programmed

as Null zones.

[01] Delay 1

This zone type, normally used for entry/exit doors, can be

violated during the exit delay time without causing an alarm.

Once the exit delay has expired, opening the zone will start

the entry delay timer. During the entry delay time, the

keypad buzzer will sound steadily to advise the user that the

system should be disarmed. If the panel is disarmed before

the entry time expires, no alarm will be generated.

[02] Delay 2

The Delay 2 entry delay time can be set independent of Delay

1 in programming section [02] (System Times).

[03] Instant Zone

This zone type will cause an instant alarm if it is violated

when the panel is armed. Typically, this zone is used for

windows, patio doors or other perimeter zones.

[04] Interior Zone

This zone will not cause an alarm if violated during the entry

delay. If the zone is violated before the entry delay has

SECTION5

begun, it will cause an instant alarm. Typically, this zone is

used for interior protection devices, such as motion detectors.

[05] Interior Stay/Away Zone

This zone type works similar to the Interior zone type except

that it will be automatically bypassed under the following

conditions:

• When the panel is armed in the Stay Mode

(see (see

(see

Section 3.5 – “Function Keys”).Section 3.5 – “Function Keys”).

Section 3.5 – “Function Keys”).

• When the panel is armed without entry delay

(see (see

(see

Section 3.4 – “[Section 3.4 – “[

Section 3.4 – “[

✱✱

✱

] [9] Arming Without Entry Delay”] [9] Arming Without Entry Delay”

] [9] Arming Without Entry Delay”

• When the panel is armed with a user code and a Delay

type zone is NOT tripped during the exit delay.

The automatic bypass prevents the user from having to

manually bypass interior type zones when arming at home.

This zone is typically used for interior protection devices,

such as motion detectors.

[06] Delay Stay/Away Zone

This zone type will operate similar to Interior Stay/Away

zones except that it will always provide an entry delay.

Typically, this zone is used for interior protection devices,

such as motion detectors. This zone option will help prevent

false alarms since it always provides an entry delay time for

the user to turn off the panel.

[07] Delayed 24 Hour Fire Zone

When this zone is violated, the alarm output will be

immediately activated but the communicator will be delayed

for 30 seconds. If the user presses any key on any keypad

during this delay, the alarm output and the communicator

will be delayed an additional 90 seconds, giving the user

time to correct the problem. If the zone is still violated after

the 90 second delay, the panel will sound the alarm output

and delay the communicator for 30 seconds.

If the user does not press a key during the 30 second delay,

the alarm output will latch and the panel will communicate

the alarm to the central station. The alarm will sound for the

Bell Cutoff time programmed in Section [02] (“System

Times”).

If a second Fire type zone is violated or if the Fire

keys are pressed during the delay period, the panel

will latch the alarm output and will immediately

communicate the alarm.

A violated Fire zone will be displayed on all keypads and

can be delayed at any keypad. Typically this zone is used

for latching smoke detectors.

[08] Standard 24 Hour Fire Zone

When this zone is violated, the panel will immediately latch

the alarm output and communicate to the central station.

The alarm will sound for the Bell Cutoff time programmed in

Section [02] (“System Times”).

A violated Fire zone will be displayed on all keypads.

Typically this zone is used for pull stations.

[09] 24 Hour Supervisory Zone (with LINKS)

If this zone is violated when the system is either armed or

disarmed, the panel will report to the central station, and will

log the zone fault to the Event Buffer.

Program Descriptions

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 42 43

Comentarios a estos manuales

Sin comentarios

Digital Security Controls PC1575 Especificaciones Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Security Controls PC1575